Early-Stripping Slab Formwork System: KITSEN Fastform for the Malaysian and Southeast Asian Market Showcased

YANGJIANG, GUANGDONG, CHINA, November 11, 2026 /EINPresswire.com/ -- KITSEN, the Chinese formwork and scaffolding manufacturer, presented its slab shoring and formwork equipment at the ONE BUILD Expo, the premier building and construction trade exhibition held in Kuala Lumpur, Malaysia. During the exhibition, the company introduced its engineered aluminum panel-prop-formwork solution to the Southeast Asian market, focusing on mechanical assembly speed, crane-independent component weights, and documented working load capacities for elevated deck construction. For commercial concrete contractors, forming specialists, and multi-story structural builders across Malaysia and neighboring ASEAN economies, the KITSEN exhibition booth displayed how its engineered quick early-stripping slab formwork operates by separating deck-contact panels from vertical shoring props during form removal operations. Backed by export dispatch facilities operating from Shenzhen, China, and containerized freight delivery structures, KITSEN demonstrated its manufacturing capacity to supply full container orders to commercial builders and formwork equipment rental companies operating throughout Southeast Asia.

Engineering Architecture of the Fastform Panel-Prop System

Cast-in-place concrete construction for multi-story residential buildings, commercial office developments, and structural parking decks requires modular shoring equipment capable of accommodating varying structural layouts. The KITSEN Fastform system is manufactured as an engineered aluminum panel-prop-formwork system designed for structural concrete placement involving integrated slabs, beams, and columns. The system construction utilizes 6061-T6 structural aluminum alloy for primary framing profiles, filler beams, and modular trusses, paired with 10 mm multi-ply birch plywood contact sheathing.

The system layout is structured around rectangular standard formwork panels, with the primary panel unit measuring 1,800 mm by 1,200 mm. To address framing requirements around drop beams, column junctions, and perimeter boundary conditions, the product line provides standardized filler beams manufactured in lengths of 1,800 mm, 1,200 mm, 900 mm, and 600 mm, alongside modular structural trusses measuring 1,800 mm by 600 mm. The formwork working height carries no mechanical restriction, allowing jobsite personnel to adjust shoring elevations by selecting and extending designated props.

The assembly incorporates a defined component matrix consisting of panels, filler beams, early-stripping crowns, shoring props, lock pins, trusses, guardrail posts, specialized disassembly tools, cantilever support braces, and transverse beams. By engineering standardized connections across these modular components, the hardware maintains structural alignment during concrete placement while avoiding on-site timber cutting and fitting waste.

The Mechanics of the Early-Stripping Support Mechanism

The functional operation of the Fastform system is based on its early-stripping support mechanism mounted atop the shoring props. In conventional slab forming operations, formwork contact sheets and primary shoring props remain tied together beneath poured slabs until structural curing requirements are met, restricting component movement across the jobsite.

The KITSEN early-stripping configuration separates the formwork contact panels from the vertical shoring path through an engineered crown mechanism:

Shoring Alignment During Placement: Prior to concrete placement, the drop crown holds the 1,800 mm by 1,200 mm aluminum panels and filler beams flush with the top of the shoring prop, supporting the placement of structural concrete up to an allowable slab thickness of 300 mm.

Drop Crown Release: Once the placed concrete reaches project-specific initial strength criteria, field technicians release the early-stripping support mechanism at the crown using the system's specialized disassembly tool.

Controlled Panel Lowering: Releasing the crown mechanism causes the supported panels and filler beams to lower away from the concrete soffit, while the vertical shoring props remain upright and undisturbed in direct contact with the slab to provide continuous load-bearing support.

Component Cycling: Field personnel remove the lowered aluminum panels, trusses, and filler beams from below without altering the vertical position of the shoring props. These recovered deck elements can then be transferred to subsequent working areas to begin framing the next concrete pour, while the props maintain intermediate structural support.

Technical Specifications and Documented Load Limits

For Malaysian structural engineers, regional formwork layout planners, and site safety coordinators across Southeast Asia, verification of safe working loads and material standards is necessary for engineering submittals and formwork design drawings. The KITSEN Fastform system is manufactured to verified technical parameters:

The structural frame profiles, intermediate trusses, and filler beams are fabricated from extruded aluminum alloy 6061-T6, which provides structural rigidity while maintaining component handling weights suitable for manual installation. The slab contact surface consists of 10 mm thick birch plywood, providing a uniform concrete finish across repeated placement cycles.

Standard panel dimensions measure 1,800 mm in length by 1,200 mm in width, with additional modular dimensions available depending on project layout requirements. Intermediate filler beams are provided in standardized dimensions of 1,800 mm, 1,200 mm, 900 mm, and 600 mm, and structural trusses measure 1,800 mm by 600 mm. The system is structurally rated for concrete slab pours with an allowable concrete thickness of 300 mm or less.

The certified maximum safe working load capacity is 13.75 kN/m2 evenly distributed across the deck area. Elevation capabilities are determined by the extension parameters of the selected props without built-in vertical height limits. In addition, the modular connections incorporate a 6-direction locking restriction design that limits lateral movement, vertical shift, and twisting at the connection nodes during concrete placement and vibrating compaction.

Field Assembly Benchmarks and Labor Performance

Crew productivity and equipment handling requirements represent measurable factors in commercial concrete construction scheduling. Systems requiring crane assistance for every panel movement create dependencies on site hoisting equipment, while job-built timber decking requires extensive carpentry hours.

The KITSEN Fastform system organizes its primary assembly steps around three core elements: the formwork panel, the drop crown, and the shoring prop. The lightweight 6061-T6 aluminum composition permits manual handling and positioning by individual workers from stable floor levels or low working platforms without crane involvement.

The manufacturer has documented the following field productivity rates under standard site conditions:

assembly Rate: A single trained worker can assemble 27 square meters of slab formwork per hour.

Stripping Rate: Utilizing the drop crown mechanism and the designated disassembly tool, a single worker can strip and stack 54 square meters of formwork panels per hour.

Structural Connection Stability: The mechanical 6-direction locking restriction stabilizes the connection points between panels, crowns, and vertical props, maintaining structural frame alignment without requiring separate loose fastening hardware.

Industry Reception and Direct Sourcing at the ONE BUILD Expo

The presentation of the KITSEN Fastform system at the ONE BUILD Expo provided Malaysian concrete contractors, regional forming specialists, and Southeast Asian equipment distributors with direct access to an engineered aluminum early-stripping slab formwork solution. By combining 6061-T6 aluminum alloys, 10 mm birch plywood sheathing, a 13.75 kN/m2 safe working load, an allowable slab thickness up to 300 mm, and verified assembly rates of 27 m2 per hour, the system provides commercial builders with a documented, crane-independent forming method for structural slab construction.

KITSEN supplies commercial construction contractors, equipment distributors, and formwork rental fleets in Malaysia and across Southeast Asia through direct containerized export channels:

Minimum Order Quantity: Export shipments are supplied on a full container load basis, supporting consolidated delivery of panels, props, crowns, and accessories.

Origin and Dispatch Hub: Products originate from KITSEN's manufacturing facilities in China and are dispatched through the port of dispatch at Shenzhen, China.

Commercial Payment Terms: Export transactions follow a commercial structure requiring a 30% T/T deposit payment prior to manufacturing commencement, with the remaining 70% balance settled against presentation of the ocean Bill of Lading (B/L) copy.

Engineering Layout Support: KITSEN provides project-specific component schedules, quantity calculations, and structural layouts based on architectural and structural engineering plans submitted by clients.

General contractors, formwork engineers, and equipment rental fleet operators seeking detailed technical documentation, component schedules, or containerized procurement quotations can explore the full structural portfolio and contact the engineering team via the official portal at

Kitsen Formwork and Scaffolding Technology Co., Ltd.
KITSEN
Visit us on social media:
LinkedIn
Facebook
YouTube